Zum Hauptinhalt wechseln

Einleitung

Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2012.

This guide shows the removal of just one disc, but the procedure for the other two discs is identical.

  1. Before you begin, be sure that the sander is unplugged and powered off.
    • Before you begin, be sure that the sander is unplugged and powered off.

    • Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

  2. Peel the hook-and-loop sandpaper disc off of the driver assembly.
    • Peel the hook-and-loop sandpaper disc off of the driver assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Miles Robinson

Mitglied seit: 04.03.2019

836 Reputation

7 Anleitungen geschrieben

Team

The Home Depot Mitglied von The Home Depot

Community

6.556 Mitglieder

1.005 Anleitungen geschrieben

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 22