Zum Hauptinhalt wechseln

Anschließen eines XLR Kabels am Shure SM58

  1. Anschließen eines XLR Kabels am Shure SM58, XLR Kabel anschließen: Schritt 1, Bild 1 von 1
    • Überprüfe, dass du ein passendes 3 Pin XLR Kabel hast.

    • Nehmen sie das Kabelende mit dem weiblichen Anschluss (Stecker mit 3 Löchern).

  2. Anschließen eines XLR Kabels am Shure SM58: Schritt 2, Bild 1 von 1
    • Richten sie die Pins im Anschluss des Mikrofons auf die Löcher im Kabelende aus.

  3. Anschließen eines XLR Kabels am Shure SM58: Schritt 3, Bild 1 von 1
    • Wenn die Pins richtig ausgerichtet sind stecke das Kabel in das untere Mikrofonende. Du solltest dabei einen Klick hören.

Abschluss

Um das Kabel vom Mikrofon abzustecken, arbeite die Schritte in umgekehrter Reihenfolge ab.

13 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Diese Übersetzer:innen helfen uns, die Welt zu reparieren! Wie kann ich mithelfen?
Hier starten ›

nat coll

Mitglied seit: 09/27/12

642 Reputation

14 Anleitungen geschrieben

Team

Cal Poly, Team 7-53, Forte Fall 2012 Mitglied von Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Mitglieder

20 Anleitungen geschrieben

21 Kommentare

When disconnecting the cable - press the little latch (pointing towards you in the last picture) to release and then pull the cable out.

harrywwc - Antwort

Is this April's fool? XD

s6963172 - Antwort

how i repair the PG48 the XLR conector moves in and out when the cable ar plugged. The conector male in the microphone have an screw but that one not works...

What am i do?

If you have an idea to the answer or any tip to resolve this trouble feel fre to tweet me.

@ Theradioholic

on

#Twitter

Santiago Morales - Antwort

I know a few people who would see this and still screw it up.

jimboc - Antwort

do it in reverse? you have to press the button though on the male end...

Michael Fox - Antwort

Will this work with an Audio-Technica ATM-410, or just the Shure?

cbrislain - Antwort

Just Shure. On Audio-Technica you have to rotate the plug six times clockwise and whisper a few nice words into it before plugging it in. I've always found that lullabies work quite well.

staale -

I have a 1/4 adapter on my Shure, is that process different? I can't seem to make the male 1/4" connect to the female XLR

JON CAMPBELL - Antwort

Push harder.

staale -

Some of us are musicians , so we appreciate the help

tomandlindafirme - Antwort

When do you hear the sound from it?

Charlie Green - Antwort

Bloomin' eck.... & I've been using cellotape, Blu Tak and super glue. No wonder I had to revert to the megaphone all the time

george sandoz - Antwort

I don't know about you lando77 but I always blow on the female end (the cable end with the holes) to blow dry any moisture out. What good does it do to blow on the male pins?

darryltrimm - Antwort

Do these instructions work for the ElectroVoice EV 635A as well?

carterjim - Antwort

This is useless. Why didn't you post a video that shows the process.

mperloe - Antwort

Wow!!! Thank you so much! This is really great information. Now I won't have to hire people to come do this for me anymore. Can you post a video of how to put the microphone on a stand?

dhoffman98 - Antwort

Thanks for posting this, I recently ran out of toilet tissue and have been using my Shure SM58 Owner's Manual. You're a lifesaver!

hemightbefluffy - Antwort

He's holding the plug with his right hand. But what if I'm left handed. Do I need to rotate it? Or should I switch what side I'm standing on?

Bob DeMaa - Antwort

Managed it on 5th attempt , now what the heck do I do with the other end of the cable ???

gary blair - Antwort

are these instructions specifically for drummers or can anybody use them?

Cedric the Dead - Antwort

Hola ..he comprado un micrófono shure pg48 1i no se porque al conectar con el cable no se escucha ningun sonido..

cristianbocanel51 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 37

Letzte 30 Tage: 125

Insgesamt: 67,377