Apple Powerbook 520 General Disassembly

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Einleitung

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

Was du brauchst

Schritt 1 Apple Powerbook 520 General Disassembly

Apple Powerbook 520 General Disassembly, Apple Powerbook 520 General Disassembly: Schritt 1, Bild 1 von 2

Apple Powerbook 520 General Disassembly, Apple Powerbook 520 General Disassembly: Schritt 1, Bild 2 von 2

Turn computer over.
Remove battery expansion cover and battery.

Übersetzen

Schritt 2

With monitor hinge at the bottom, remove the two top center screws.

Übersetzen

Schritt 3

Remove top left and top right screws.

Übersetzen

Schritt 4

Remove middle left and middle right screws.

Übersetzen

Schritt 5

Open computer kickstands.
Remove screws underneath each kickstand.

Übersetzen

Schritt 6

Lift keyboard from bottom and take out of shell.

Übersetzen

Schritt 7

Apple Powerbook 520 General Disassembly: Schritt 7, Bild 3 von 3

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.
Removing both ribbon cables from the motherboard will leave the clamps like so.
From here you can access the logic board, hard drive, and floppy drive.