Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Astro A20 Frame Replacement

Was du brauchst

  1. Astro A20  Frame Replacement, Frame: Schritt 1, Bild 1 von 1
    • Place your hand on the back of the speaker.

  2. Astro A20  Frame Replacement: Schritt 2, Bild 1 von 2 Astro A20  Frame Replacement: Schritt 2, Bild 2 von 2
    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

  3. Astro A20  Frame Replacement: Schritt 3, Bild 1 von 1
    • Lift the speaker.

    • Disconnect the white connector from the device.

    • Remove the wires connecting the frame shown by the yellow square.

    • Pull the black cord through the hole shown by the blue arrow.

  4. Astro A20  Frame Replacement: Schritt 4, Bild 1 von 1
    • Find the top 7mm J1 JIS head screws.

    • Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.

    • Pull the black cord through the frame.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

University of Alabama, Team S1-G2, Bedsole Fall 2018 Mitglied von University of Alabama, Team S1-G2, Bedsole Fall 2018

UA-BEDSOLE-F18S1G2

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 30

Insgesamt: 2,126