Zum Hauptinhalt wechseln

Einleitung

If you need to replace an damaged or uncomfortable ear cushion for the Astro A20, you will need a spudger and a new ear cushion.

Werkzeuge

Ersatzteile

  1. Place one hand on the hard side of the headset ear portion and on the cushion.
    • Place one hand on the hard side of the headset ear portion and on the cushion.

    • Lift the small portion on the edge of the cushion.

  2. Slide the metal spudger underneath the lift part of the ear cushion.
    • Slide the metal spudger underneath the lift part of the ear cushion.

    • Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

    All of this is accurate, except the battery & motherboard Are on the charging port side, opposite mic side unlike picture. The right earphone is correct side.

    rebjr2880 - Antwort

  3. Remove the ear cushion from the headset. Remove the ear cushion from the headset.
    • Remove the ear cushion from the headset.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Team

University of Alabama, Team S1-G2, Bedsole Fall 2018 Mitglied von University of Alabama, Team S1-G2, Bedsole Fall 2018

UA-BEDSOLE-F18S1G2

4 Mitglieder

10 Anleitungen geschrieben

Ein Kommentar

The lighting is quite poor. I can't see what you're doing at all.

It's also missing a lot of information. Are they glued down? Are you able to get the ear cups off intact so they can be replaced after your wash them?

Vitrified Valkyrie - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 5

Letzten 7 Tage: 16

Letzten 30 Tage: 89

Insgesamt: 3,059