1. Turn the power off and turn the netbook upside down.
    • Turn the power off and turn the netbook upside down.

    • Slide both battery catches together to release the battery.

    • Slide the battery out.

    While there is a fairly long list of tools listed here, I was able to complete the entire guide using only a 3/64" flathead mini screwdriver (the kind you get for $0.99). I replaced the stock 500GB 5400RPM drive with the updated 7200RPM slim drive of the same line with no issues. The BIOS picked it up immediately, and I need only reinstall an OS.

    Tolidano - Antwort

    Missing step: remove the two screws under the battery, otherwise the keyboard won’t come off

    Andrea Borgia - Antwort

  2. Locate the memory compartment.
    • Locate the memory compartment.

    Kommentar hinzufügen

  3. Kommentar hinzufügen

    • Using a Spudger, push both right and left metal clip to release one of the RAM module.

    • Slide out the RAM module.

    • Do the same with the second RAM module if necessary.

    Kommentar hinzufügen

  4. Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    • Remove the screws as necessary.

      • For top cover removing, only remove the 2 bottom screws.

      • For Keyboard removing, remove all 4 screws.

      • The one short screw paterns to uper left screw hole directly on the PCB.

    Kommentar hinzufügen

    • Use a Plastic Opening Tools to release the top cover.

      • Start from the left side.

      • Go around on the bottom

      • Finish with the right side.

    • The top cover is still connected to the PCB with the touchpad ribbon. Handle it carefully.

    excellent guide. but be careful - it's very easy to broke narrow plastic clip :(

    Marcin Dudek - Antwort

    • Carefully slide the top cover to the bottom in order to see the touchpad connector on the PCB.

    • Use a Spudger to slide the conector attachment black part and release the ribbon from the PCB.

    • Now you can remove the top cover

    Kommentar hinzufügen

    • Make sure that the two upper screws inside the RAM compartment are removed before to continue. (Refer to Step 5).

    • Remove the keyboard 4 screws on the bottom.

    • Use a Plastic Opening Tools to release the keyboard clips on the left and right side.

    There are two very small screws inside the battery compartment which hold the top edge of the keyboard. These must also be removed.

    Ray James - Antwort

    • At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.

    • Carefully slide a Spudger between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.

    • The keyboard is still connected to the PCB with a ribbon. Handle it carefully.

    Information : you have 2 screws under battery hole which need to be removed too before to release keyboard

    renard - Antwort

    • Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB.

    • Use a Spudger to slide the connector attachment black part and release the ribbon from the PCB.

    • Now you can remove the keyboard.

    Kommentar hinzufügen

    • Peel off the protective tape at the bottom left corner.

    • Peel off the warranty void at the bottom right corner and remove the screw below.

    • Remove the 6 other screws.

    Kommentar hinzufügen

    • Remove the protector plate.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Gaetan

Mitglied seit 26.12.2012

9.304 Reputation

18 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 13

Insgesamt: 2,895