Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Asus Eee PC 1215N Metallic PCB protector plate Replacement

Was du brauchst

  1. Asus Eee PC 1215N Metallic PCB protector plate Replacement, Battery: Schritt 1, Bild 1 von 2 Asus Eee PC 1215N Metallic PCB protector plate Replacement, Battery: Schritt 1, Bild 2 von 2
    • Turn the power off and turn the netbook upside down.

    • Slide both battery catches together to release the battery.

    • Slide the battery out.

  2. Asus Eee PC 1215N Metallic PCB protector plate Replacement, RAM: Schritt 2, Bild 1 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, RAM: Schritt 2, Bild 2 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, RAM: Schritt 2, Bild 3 von 3
    • Locate the memory compartment.

    • Using a Plastic Opening Tools, remove the screw rubber cover.

    • Remove the screw.

  3. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 3, Bild 1 von 1
    • Use a Plastic Opening Tools near the screw hole to release the cover.

    • Remove the cover

  4. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 4, Bild 1 von 2 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 4, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • Using a Spudger, push both right and left metal clip to release one of the RAM module.

    • Slide out the RAM module.

    • Do the same with the second RAM module if necessary.

  5. Asus Eee PC 1215N Metallic PCB protector plate Replacement, Top Cover (Touchpad): Schritt 5, Bild 1 von 1
    • Remove the screws as necessary.

    • For top cover removing, only remove the 2 bottom screws.

    • For Keyboard removing, remove all 4 screws.

    • The one short screw paterns to uper left screw hole directly on the PCB.

  6. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 6, Bild 1 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 6, Bild 2 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 6, Bild 3 von 3
    • Use a Plastic Opening Tools to release the top cover.

    • Start from the left side.

    • Go around on the bottom

    • Finish with the right side.

    • The top cover is still connected to the PCB with the touchpad ribbon. Handle it carefully.

  7. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 7, Bild 1 von 2 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 7, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • Carefully slide the top cover to the bottom in order to see the touchpad connector on the PCB.

    • Use a Spudger to slide the conector attachment black part and release the ribbon from the PCB.

    • Now you can remove the top cover

  8. Asus Eee PC 1215N Metallic PCB protector plate Replacement, Keyboard: Schritt 8, Bild 1 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, Keyboard: Schritt 8, Bild 2 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, Keyboard: Schritt 8, Bild 3 von 3
    • Make sure that the two upper screws inside the RAM compartment are removed before to continue. (Refer to Step 5).

    • Remove the keyboard 4 screws on the bottom.

    • Use a Plastic Opening Tools to release the keyboard clips on the left and right side.

  9. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 9, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • At this step, the keyboard is still maintained with double-sided tape between the keyboard underside and the metallic PCB protector.

    • Carefully slide a Spudger between the keyboard underside and the metallic PCB protector near the center/right at the bottom. Use the spudger as a lever to release the keyboard from the metallic PCB protector.

    • The keyboard is still connected to the PCB with a ribbon. Handle it carefully.

  10. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 10, Bild 1 von 2 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 10, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • Carefully slide the keyboard to the top in order to see the ribbon connector on the PCB.

    • Use a Spudger to slide the connector attachment black part and release the ribbon from the PCB.

    • Now you can remove the keyboard.

  11. Asus Eee PC 1215N Metallic PCB protector plate Replacement, Metallic PCB protector plate: Schritt 11, Bild 1 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, Metallic PCB protector plate: Schritt 11, Bild 2 von 3 Asus Eee PC 1215N Metallic PCB protector plate Replacement, Metallic PCB protector plate: Schritt 11, Bild 3 von 3
    • Peel off the protective tape at the bottom left corner.

    • Peel off the warranty void at the bottom right corner and remove the screw below.

    • Remove the 6 other screws.

  12. Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 12, Bild 1 von 2 Asus Eee PC 1215N Metallic PCB protector plate Replacement: Schritt 12, Bild 2 von 2
    • Remove the protector plate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Gaetan

Mitglied seit: 12/26/12

9.574 Reputation

18 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 3,472