Einleitung

This guide is intended to show how to remove a damaged screen from the laptop. Reversing the steps will describe the steps needed to replace the laptop with a new screen.

Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 ,  two of them are 0.0793 JIS #0.
  • Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.

Kommentar hinzufügen

Use the plastic opening tool to pry the back panel off the base of the laptop.
  • Use the plastic opening tool to pry the back panel off the base of the laptop.

Kommentar hinzufügen

  • Unscrew the four screws to remove the battery.

Kommentar hinzufügen

  • Un-clip both wire clips on the upper and right side of the battery.

  • Lift the battery out of the device.

Kommentar hinzufügen

  • Use the metal spudger to gently lift the two plastic squares off the screen.

Kommentar hinzufügen

  • Unscrew the two PH0 screws and set them aside.

Kommentar hinzufügen

  • Use the plastic opening tool to pry the front edges of the screen off of the back.

Kommentar hinzufügen

  • Take off the tapes.

  • Gently pry the LCD from the front frame.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Colleen Ford

Mitglied seit 09.04.2018

205 Reputation

2 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 10

Letzte 30 Tage: 46

Insgesamt: 164