Einleitung

This guide will show the user how to safely remove and replace the battery.

  1. Lift the rubber cover found on the bottom of the laptop.
    • Lift the rubber cover found on the bottom of the laptop.

    • Remove the 5.2 mm screw with a Phillips 1 Screwdriver.

    Kommentar hinzufügen

  2. Use the nylon spudger to remove the back center panel.
    • Use the nylon spudger to remove the back center panel.

    Kommentar hinzufügen

    • Use a Phillips 1 Screwdriver to remove the 5 mm screw that is located underneath the back panel.

    Kommentar hinzufügen

    • Pull out the optical drive found on the side of the laptop.

    Kommentar hinzufügen

    • Use a pair of tweezers to remove the top four rubber stoppers found on the bottom of the laptop.

    Kommentar hinzufügen

    • Use a Phillips 1 Screwdriver to remove the top four 8.5 mm screws.

    Kommentar hinzufügen

    • Use a nylon spudger to carefully pry the top back panel off.

    • While removing the top back panel, be careful not to break the four pin connector located underneath.

    • Disconnect the four-pin connector and remove the top back panel from the computer.

    Kommentar hinzufügen

    • Use a Phillips 1 Screwdriver to remove the four 6.8 mm screws underneath the back panel.

    • Lift away the metal housings from each side of the laptop.

    Kommentar hinzufügen

    • Use a Phillips 1 Screwdriver to remove the ten 5.2 mm screws holding the main panel in place.

    • Use a Phillips 1 Screwdriver to remove the four 5.2 mm screws underneath the center panel.

    Kommentar hinzufügen

    • Use a plastic opening tool to pry the keyboard from the base of the laptop.

    • Lift the keyboard carefully so as to not tear or break the four ribbon connectors underneath the keyboard.

    Kommentar hinzufügen

    • Use a pair of tweezers to undo each of the four ribbon connectors.

    • The keyboard is now completely disconnected from the laptop and you can remove it.

    Kommentar hinzufügen

    • Use a pair of tweezers to carefully disconnect the pin connector.

    Kommentar hinzufügen

    • Use a Phillips 1 Screwdriver to remove the final four remaining 6.8 mm screws located underneath the back panel.

    • The monitor is now free to be completely lifted off the laptop.

    Kommentar hinzufügen

    • Disconnect the pin connector that attaches the battery to the motherboard.

    • Use a Phillips 1 Screwdriver to remove the two 5.4 mm screws.

    Kommentar hinzufügen

    • The battery can now be lifted away from the laptop.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Aurora Rios

Mitglied seit 22.01.2018

712 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team S16-G1, Banghart Winter 2018 Mitglied von Cal Poly, Team S16-G1, Banghart Winter 2018

CPSU-BANGHART-W18S16G1

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 15

Letzte 30 Tage: 63

Insgesamt: 378