Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Place the computer upside down.
-
Using your thumbs, slide both latches away from each other (towards the outside).
-
Push the battery out with your fingers.
-
-
-
On the back panel unscrew highlighted screws and carefully put them to the side as not to lose them.
-
-
-
-
Locate the RAM chip highlighted in Blue and the two metal tabs holding it in place highlighted in red.
-
-
-
Carefully use your thumbs to push out the metal tabs and the RAM should spring up.
-
-
-
After the ram has sprung up, carefully grab the edges with your fingers and gently pull straight out.
-
-
-
After you have gotten either more RAM or replacement RAM line up the pins and slot (highlighted red) in the RAM card with the pin on the computer.
-
The other side of the RAM slot is a place for more RAM if you want to put more in. The spaces are highlighted in blue.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 2-9, Johann Summer 2010 Mitglied von Cal Poly, Team 2-9, Johann Summer 2010
CPSU-JOHANN-R10S2G9
5 Mitglieder
10 Anleitungen geschrieben
