Zum Hauptinhalt wechseln

Einleitung

This guide will show you how to locate and remove the cooling fan, in order to replace the motherboard.

  1. Turn off the computer and unplug the charge cable.
    • Turn off the computer and unplug the charge cable.

    • If the computer is on or plugged in, it could cause electric shock.

    • Turn the computer upside down.

  2. Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).
    • Remove the nine Philips #00 screws holding the back panel in place (four 5.6mm, four 7.7mm, and one 9.2mm).

  3. Use a plastic opening tool to gently remove the back panel. Use a plastic opening tool to gently remove the back panel.
    • Use a plastic opening tool to gently remove the back panel.

  4. Unscrew the five 4.9mm screws holding the cooling fan in place using a Phillips #0 screwdriver.
    • Unscrew the five 4.9mm screws holding the cooling fan in place using a Phillips #0 screwdriver.

  5. Unplug the power bus for the fan.
    • Unplug the power bus for the fan.

  6. Lift up and remove the cooling fan from the slot.
    • Lift up and remove the cooling fan from the slot.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mitchell Jackson

Mitglied seit: 17.05.2017

742 Reputation

7 Anleitungen geschrieben

Team

IUPUI, Team S4-G4, Wilson Summer 2017 Mitglied von IUPUI, Team S4-G4, Wilson Summer 2017

IUPUI-WILSON-SU17S4G4

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 266