Zum Hauptinhalt wechseln

Asus X540S panel Disassembly

Was du brauchst

    • Open the Optical Drive to allow removal of keyboard before powering down computer.

  1. Asus X540S panel Disassembly: Schritt 2, Bild 1 von 1
    • Remove the two 15mm Philips #1 screws.

    • Remove the two 12mm Philips #1 screws.

    • Remove the six 9mm Philips #1 screws.

  2. Asus X540S panel Disassembly: Schritt 3, Bild 1 von 3 Asus X540S panel Disassembly: Schritt 3, Bild 2 von 3 Asus X540S panel Disassembly: Schritt 3, Bild 3 von 3
    • Lift the side of the top.

    • Remove the keyboard cable.

    • Remove the trackpad cable.

    • Lift the release tabs on the keyboard/trackpad connectors

    When removing both cables there is a small black plastic flap covering the connection.

    GENTLY lift that flap and GENTLY lift the end of the cable/ribbon and you're good to go.

    My first try I was under the impression it was more of a plug and didn't see any specifics just like above “remove cable” but no description of how.

    Even though I did it wrong, it didn't damage anything, and this guide was a big help.

    F S - Antwort

    Added a note. Thanks for the comment!

    Padraic Hoselton -

    While lifting the lid, it's useful to have a spudger to detach the snaps from the top

    Emily Klassen - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer:innen haben diese Anleitung absolviert.

Padraic Hoselton

Mitglied seit: 08/22/17

4.180 Reputation

12 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

322 Mitglieder

2.506 Anleitungen geschrieben

3 Kommentare

Feels like the panel is glued on mine. all screws are out, corners are loose but rest feels glued. anybody have advice? I dont have access to a heatgun

Non Gerrell - Antwort

Well the first time I did it I had to give it a bit more pressure and loosen it up on all the sides. Because it should only be snapped in place. I don’t remember mine having glue the first time but I do remember I needed pry tools to get it off. I used some ifixit spudgers.

Padraic Hoselton -

I used a plastic card (like credit card) to slide between the panels along the edge - it went smooth!

Alexey Sazonov -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 13

Letzte 30 Tage: 69

Insgesamt: 10,068