Zum Hauptinhalt wechseln

Einleitung

We will show you how to open the laptop and change / upgrade the HDD (hard disk drive).


Please SUBSCRIBE to my channel ツ

Einführungsvideo

  1. Switch off the Laptop and remove the Battery. Unscrew the two Philips screws and remove the HDD / RAM Cover. Unscrew the two Philips screws and remove the HDD / RAM Cover.
    • Switch off the Laptop and remove the Battery.

    • Unscrew the two Philips screws and remove the HDD / RAM Cover.

  2. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  3. Remove three screws securing the hard drive caddy (hard drive assembly). Slide the hard drive assembly to the left to disconnect it from the motherboard. Slide the hard drive assembly to the left to disconnect it from the motherboard.
    • Remove three screws securing the hard drive caddy (hard drive assembly).

    • Slide the hard drive assembly to the left to disconnect it from the motherboard.

  4. Remove the two Philips screws and separate the HDD from the caddy case.
    • Remove the two Philips screws and separate the HDD from the caddy case.

    • You can install 2.5" SATA HDD, 5400rpm / 7200rpm, 320GB / 500GB / 750GB /1TB.

    • After changing / upgrading the HDD you must install an operating system or clone & copy the information from the old HDD to the new one.

    • .

    • Did you do it successfully.

    • Please SUBSCRIBE to my channel ツ

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit: 09.12.2013

164.077 Reputation

305 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

286 Mitglieder

808 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 13

Letzte 30 Tage: 75

Insgesamt: 6,888