Einleitung

This guide will show you how to replace a dented or damaged bottom panel on an Asus ZenBook UX303U laptop.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Flip your laptop over so that the bottom is facing you. Remove the nine 4mm Phillips #00 screws from the back panel.
    • Flip your laptop over so that the bottom is facing you.

    • Remove the nine 4mm Phillips #00 screws from the back panel.

    • Remove the two black rubber pads at the rear corners of the laptop near the screen hinge. They are attached with adhesive and can be pried off with a plastic removal tool or flat head screwdriver.

    • Remove the two screws from where the rubber pads were attached.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Insert the ifixit opening tool between back panel and the frame. Lift to remove the back panel.
    • Insert the ifixit opening tool between back panel and the frame.

    • Lift to remove the back panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Luis Perez

Mitglied seit: 14.02.2018

328 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team S3-G5, Nance Spring 2018 Mitglied von USF Tampa, Team S3-G5, Nance Spring 2018

USFT-NANCE-S18S3G5

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 7

Letzte 7 Tage: 40

Letzte 30 Tage: 118

Insgesamt: 984