Einleitung
If the HD web camera is not functioning this guide will teach you how to get behind the screen cover to replace the camera.
Note: Be sure the camera is broken and not just a software issue before you replace it.
Was du brauchst
-
-
Heat the adhesive behind the screen frame with a hair dryer or a heat gun.
-
-
-
Insert a spudger between the display screen frame and the back screen panel.
-
Pry the display screen frame away from the back screen panel.
-
Continue to heat and remove the display screen frame along the whole perimeter.
-
-
-
-
Unplug the bundled cable connector.
-
Pull the cable away from the connector in the same direction as the individual wires are running.
-
-
-
Pry the camera out from the two pins on the left and right of the camera with the tip of a spudger.
-
Remove the camera completely.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
CSU Fullerton, Team 2-2, Bruce Fall 2015 Mitglied von CSU Fullerton, Team 2-2, Bruce Fall 2015
CSUF-BRUCE-F15S2G2
4 Mitglieder
6 Anleitungen geschrieben
2 Kommentare
what type/model/code for its replacement camera ? so i cant find it in part store...
Thank you for the demo. It appears to be easy to replace the camera per your instructions. Kind regards. Mehran Gerami
