Einleitung
The START/PAUSE/RESET buttons of the Atari 5200 controller can become unresponsive due to dirty/overused connections. Opening the controller and reseating/cleaning the interfaces to these sensors can improve the button's responsiveness.
Was du brauchst
-
-
Using a plastic or metal spudger, pry open the face of the button module.
-
-
-
-
Take off the plate and the rubber buttons.
-
Clean the exposed contacts.
-
Reassemble by following the steps in reverse.
-
Test the controller. If these step don't improve connectivity, take a look at the circuitry replacement guide.
Test the controller. If these step don't improve connectivity, take a look at the circuitry replacement guide.
Team
USF Tampa, Team 13-1, Staggers Fall 2014 Mitglied von USF Tampa, Team 13-1, Staggers Fall 2014
USFT-STAGGERS-F14S13G1
5 Mitglieder
17 Anleitungen geschrieben
