Repariere deine Sachen Community Store

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Atari 5200 number pad cleaning or replacement

Einleitung

The number pad, while not used in many games, can become unresponsive over time due to dislodged/dirty sensors. Reseating and cleaning them can improve number pad responsiveness.

Was du brauchst

  1. Atari 5200 number pad cleaning or replacement, Open the controller: Schritt 1, Bild 1 von 3 Atari 5200 number pad cleaning or replacement, Open the controller: Schritt 1, Bild 2 von 3 Atari 5200 number pad cleaning or replacement, Open the controller: Schritt 1, Bild 3 von 3

    • Turn the controller over, exposing the three screws on the back (marked by the orange circles). Use a 6mm screwdriver to remove these screws.

    • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

    • Try not to move the joystick when reassembling. This will almost assuredly break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots.

    Übersetzen

  2. Atari 5200 number pad cleaning or replacement, Cleaning/Reseating (number pad front and back): Schritt 2, Bild 1 von 3 Atari 5200 number pad cleaning or replacement, Cleaning/Reseating (number pad front and back): Schritt 2, Bild 2 von 3 Atari 5200 number pad cleaning or replacement, Cleaning/Reseating (number pad front and back): Schritt 2, Bild 3 von 3

    • Take out the rubber button module of the number pad.

    • With access to the number pad sensors, use compressed air to blow out dust.

    • Wipe the sensors clean with a cloth dabbed with alcohol.

    Übersetzen

  4. Atari 5200 number pad cleaning or replacement, Reassembly Part 1: Schritt 3, Bild 1 von 2 Atari 5200 number pad cleaning or replacement, Reassembly Part 1: Schritt 3, Bild 2 von 2

    • Use a spudger to remove the top frame.

    • Take off the plate.

    • Remove the rubber buttons.

    Übersetzen

  5. Atari 5200 number pad cleaning or replacement, Reassembly Part 2: Schritt 4, Bild 1 von 2 Atari 5200 number pad cleaning or replacement, Reassembly Part 2: Schritt 4, Bild 2 von 2

    • Pull the circuit strip through the new space.

    • Realign the top and bottom of the controller.

    Übersetzen

  6. Atari 5200 number pad cleaning or replacement, Reassembly Part 3: Schritt 5, Bild 1 von 3 Atari 5200 number pad cleaning or replacement, Reassembly Part 3: Schritt 5, Bild 2 von 3 Atari 5200 number pad cleaning or replacement, Reassembly Part 3: Schritt 5, Bild 3 von 3

    • Return the buttons to the top of the controller.

    • Snap the frame back into place.

    • Screw the screws.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 8 anderen Mitwirkenden

Alan Abelson

Mitglied seit: 09/26/14

233 Reputation

5 Anleitungen geschrieben

Auszeichnungen: 10

+ 7 weitere Auszeichnungen

Team

USF Tampa, Team 13-1, Staggers Fall 2014 Mitglied von USF Tampa, Team 13-1, Staggers Fall 2014

USFT-STAGGERS-F14S13G1

5 Mitglieder

17 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 600