Zum Hauptinhalt wechseln
  1. To enable manual mode, flip the switch to "Manual Mode" LCD screen will turn on
    • To enable manual mode, flip the switch to "Manual Mode"

    • LCD screen will turn on

  2. Press On then press Start Sampling Press Enter
    • Press On then press Start Sampling

    • Press Enter

  3. Press the number of the bottle you want to sample on Press Enter LCD should now show which bottle it will take a sample in
    • Press the number of the bottle you want to sample on

    • Press Enter

    • LCD should now show which bottle it will take a sample in

  4. To enable autonomous mode, flip switch to "Node Trigger Mode" LCD should turn off
    • To enable autonomous mode, flip switch to "Node Trigger Mode"

    • LCD should turn off

    • If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.

Abschluss

Now the sampler is ready to be triggered remotely by an open-storm sensor node.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Brandon Wong

Mitglied seit: 16.01.2018

502 Reputation

2 Anleitungen geschrieben

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 375