Einleitung

You may be experiencing issues with your BLU Studio 5.0 S II motherboard (i.e power button and/or headphone jack). Replacing the motherboard of this phone isn't terribly difficult, luckily this motherboard replacement guide is very clear. We hope this guide helps you quickly replace your motherboard. Good luck and let us know how we can improve this guide.

  1. Remove the back cover of the phone with the plastic opening tool, or your fingers.
    • Remove the back cover of the phone with the plastic opening tool, or your fingers.

  2. Remove the battery from the phone with     the plastic opening tool, or your fingers.
    • Remove the battery from the phone with the plastic opening tool, or your fingers.

  3. Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert. Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert.
    • Remove the microSD and SIM card. Gently tug on the microSD and SIM card to slide them out of their insert.

  4. Locate the 5 black 3.5mm screws and the 1 3.5mm silver screw on the top back plate. Remove the 6 3.5mm screws by using a Phillips #00 screwdriver.
    • Locate the 5 black 3.5mm screws and the 1 3.5mm silver screw on the top back plate.

    • Remove the 6 3.5mm screws by using a Phillips #00 screwdriver.

  5. Remove the inner top back black plate. Remove the inner top back black plate.
    • Remove the inner top back black plate.

  6. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Schon mal was repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  7. Locate the 2 black 3.5mm screws on the motherboard. Remove the black 3.5 mm screws using a Phillips #00 screwdriver.
    • Locate the 2 black 3.5mm screws on the motherboard.

    • Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

  8. Locate the 2 orange ribbons on opposite sides. Carefully remove the two ribbon cables using tweezers. Gently rock the cable back and forth equally from both sides to not damage the pins.
    • Locate the 2 orange ribbons on opposite sides.

    • Carefully remove the two ribbon cables using tweezers.

    • Gently rock the cable back and forth equally from both sides to not damage the pins.

  9. Gently rock the plastic opening tool back and forth until the motherboard releases from the phone. Adhesion, identified with red circles, bonds the motherboard to the chassis. This may require extra effort to lift off from back of phone.
    • Gently rock the plastic opening tool back and forth until the motherboard releases from the phone.

    • Adhesion, identified with red circles, bonds the motherboard to the chassis. This may require extra effort to lift off from back of phone.

  10. Follow the wire from the motherboard. Remove the black lining covering the wire.
    • Follow the wire from the motherboard.

    • Remove the black lining covering the wire.

  11. Locate the 5 black screws on inner black lower plate. Remove the black 3.5 mm screws using a Phillips #00 screwdriver.
    • Locate the 5 black screws on inner black lower plate.

    • Remove the black 3.5 mm screws using a Phillips #00 screwdriver.

  12. Remove the bottom inner back plate. Remove the bottom inner back plate.
    • Remove the bottom inner back plate.

  13. Holding the cable with the removal tool, gently pull in the direction of the cable to remove the connector from its socket. Gently rock the cable back and forth equally from both sides to not damage the pins.
    • Holding the cable with the removal tool, gently pull in the direction of the cable to remove the connector from its socket.

    • Gently rock the cable back and forth equally from both sides to not damage the pins.

  14. Remove the whole motherboard.
    • Remove the whole motherboard.

    • The Motherboard contains the headphone jack and the power button.

Abschluss

To reassemble your device, follow these instructions in reverse order with the new motherboard.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Aaron Isaacs

Mitglied seit: 01.03.2017

107 Reputation

1 Anleitung geschrieben

Team

IUPUI, Team S2-G3, Harley Spring 2017 Mitglied von IUPUI, Team S2-G3, Harley Spring 2017

IUPUI-HARLEY-S17S2G3

4 Mitglieder

3 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 298