Repariere deine Sachen Community Store

BLU WIN HD LTE Speaker Replacement

Einleitung

The (0.7W) speaker may need to be repaired or replaced if it is not working properly.

Was du brauchst

  1. BLU WIN HD LTE Speaker Replacement, Back Case: Schritt 1, Bild 1 von 1

    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

    Bearbeiten

  2. BLU WIN HD LTE Speaker Replacement: Schritt 2, Bild 1 von 1

    • Fully remove the cover and set aside in a safe place.

    Bearbeiten

  4. BLU WIN HD LTE Speaker Replacement, Frame Cover: Schritt 3, Bild 1 von 1

    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

    Bearbeiten

  5. BLU WIN HD LTE Speaker Replacement: Schritt 4, Bild 1 von 1

    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

    Bearbeiten

  6. BLU WIN HD LTE Speaker Replacement, Speaker: Schritt 5, Bild 1 von 3 BLU WIN HD LTE Speaker Replacement, Speaker: Schritt 5, Bild 2 von 3 BLU WIN HD LTE Speaker Replacement, Speaker: Schritt 5, Bild 3 von 3

    • Use the spudger to pry out the speaker from the Frame Cover.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 140