Einleitung

This guide will show the steps needed to remove the power supply from the BOSE SoundTouch 30.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the four 15.5 mm PH2 screws securing the base plate to the device. Remove the four 15.5 mm PH2 screws securing the base plate to the device.
    • Remove the four 15.5 mm PH2 screws securing the base plate to the device.

  2. Remove the six 15.5mm PH2  screws securing the grille and rear panel to the device.
    • Remove the six 15.5mm PH2 screws securing the grille and rear panel to the device.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Schon mal was repariert? Du bist ein Genie!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  4. Remove the grille and rear panel by grabbing the corners and pulling upwards and outwards. There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.
    • Remove the grille and rear panel by grabbing the corners and pulling upwards and outwards.

    • There is a small ribbon cable that connects the display assembly to the body of the device. Make sure to disconnect the cable before pulling the grille all the way off or else the cable could snap.

  5. Remove all four 15.5 mm PH2 screws holding the power supply down.
    • Remove all four 15.5 mm PH2 screws holding the power supply down.

    • The power supply is identified by a green board with a large metal covering.

  6. Disconnect the three cables from the power supply by squeezing the white tabs if present and gently pulling. Pick up the power supply and remove the fourth cable from the underside of the power supply.
    • Disconnect the three cables from the power supply by squeezing the white tabs if present and gently pulling.

    • Pick up the power supply and remove the fourth cable from the underside of the power supply.

    • Remove the power supply.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Brennen Irey

Mitglied seit: 18.04.2018

771 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team S16-G2, Livingston Spring 2018 Mitglied von Cal Poly, Team S16-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G2

4 Mitglieder

6 Anleitungen geschrieben

where can we buy the [power supply unit, as i have messed mine by using 220v instead of 110v

Hitesh Gohill - Antwort

Hello. Do you want to exchange power supplies?

Contact me please!

Tomás Rosales -

I have the opposite problem. Bought the 110v instead of the 220v and now I have to use a step down transformer. Wanna exchange power supplies?

tomas@familiarosales.cl

Tomás Rosales - Antwort

how do I buy a new power unit?

William Painap - Antwort

Hi William

Im Kevin from Sydney, Australia.

I’d like to buy a power supply module for SoundTouch 30 as well but I cannot find anywhere.

Please let me know if you got any good news.

Cheers!

Kev

Kevin Hoang -

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 28

Letzte 30 Tage: 112

Insgesamt: 901