Zum Hauptinhalt wechseln

Back Panels

Was du brauchst

  1. Back Panels, Back Panels of Neato XV-21: Schritt 1, Bild 1 von 1
    • Flip the Neato on its back so the bottom is exposed

    • Unscrew the seven screws.

  2. Back Panels: Schritt 2, Bild 1 von 1
    • Lift the panels to reveal the batteries, brush and fan

    • There should be little to no resistance during this step, do not continue if the pieces do not separate easily

  3. Back Panels: Schritt 3, Bild 1 von 1
    • The Neato's core components are now exposed and ready to be cleaned and/or replaced.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 858