Base Replacement

Einleitung

This guide shows the steps to replace the parts in the base.

Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

Use the spudger to separate the bottom from the top.
There are two clips, located top and bottom, that you have to compress with the spudger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Mitglied seit: 02/08/16

442 Reputation

3 Anleitungen geschrieben

IUPUI-BAECHLE-S16S1G4

4 Mitglieder

16 Anleitungen geschrieben