Zum Hauptinhalt wechseln

Battery Disconnect

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. Battery Disconnect, Disconnect the battery: Schritt 1, Bild 1 von 1
    • Peel back the tape covering the battery connector enough to reveal the connector underneath.

  2. Battery Disconnect: Schritt 2, Bild 1 von 2 Battery Disconnect: Schritt 2, Bild 2 von 2
    • Use a spudger to slide the battery connector parallel to the logic board and out of its socket on the logic board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Mitglied seit: 04/11/15

196.326 Reputation

416 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 78