Einleitung
Don't worry, Dr. Dre is here! Changing the batteries is probably the easiest replacement procedure you can perform, so don't stress out and you'll be fine.
Was du brauchst
-
-
The left speaker is the speaker that holds the batteries and does not have the power switch.
-
-
-
-
Place two fingers on each side of the cap. Press and twist counterclockwise to loosen the cap.
-
Once the cap is loose, simply lift the cap out to reveal the batteries.
-
-
-
Carefully pull the batteries out of their housings. When putting in new batteries, make sure that you place each battery in the correct orientation.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
20 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 9-18, Regan Spring 2014 Mitglied von Cal Poly, Team 9-18, Regan Spring 2014
CPSU-REGAN-S14S9G18
4 Mitglieder
11 Anleitungen geschrieben
27 Kommentare
hi man you post is help me a lot thank you..God bless you
Are u using 4A batteries on this? Please reply ASAP. The 3a batteries won't fit on my beats wireless studio.
They are 2 x AAA batteries. This is Beats Studio first generation which are WIRED headphones.
