Einleitung

In this repair you will be using a chain cutting tool to reinsert a pin between two chain links, completing the chain.

Werkzeuge

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Rout the chain around the front chain rings and rear derailleur. Pull the ends of the chain together.
    • Rout the chain around the front chain rings and rear derailleur.

    • Pull the ends of the chain together.

  2. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Use the chain cutter tool to press the chain pin back through the chain link. If it is difficult to push it back in, the links are not aligned properly. Realign and try again if this is the case. Caution: Reusing pins in chains can cause the chain to fail.  This is because the pins are press fit into link.  Using a new pin when assembling a chain is recommend for long term use.
    • Use the chain cutter tool to press the chain pin back through the chain link. If it is difficult to push it back in, the links are not aligned properly. Realign and try again if this is the case.

    • Caution: Reusing pins in chains can cause the chain to fail. This is because the pins are press fit into link. Using a new pin when assembling a chain is recommend for long term use.

Ziellinie

3 weitere Nutzer haben diese Anleitung absolviert.

aaron thielk

Mitglied seit: 10.10.2010

1.726 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 5-13, Maness Fall 2010 Mitglied von Cal Poly, Team 5-13, Maness Fall 2010

CPSU-MANESS-F10S5G13

4 Mitglieder

11 Anleitungen geschrieben

what do you do if the Chain keeps Falling off when your Riding the Bike an the Chain still rubs against the tire .

Anthony - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 18

Insgesamt: 13,066