Einleitung
The vacuum belt supports the rotation of the brush roller to assist in picking up dirt. Sometimes vacuum belts break, either due to an incorrect installation or simply from wear and tear. It is recommended to replace the belt every 3-6 months.
Use this guide to replace a belt on a Bissell PowerForce Helix Bagless Upright vacuum, Model 2191.
Before you begin, make sure to unplug the vacuum's power cord before disassembling anything.
Was du brauchst
-
-
-
Remove the five 8 mm screws with a Phillips #0 screwdriver.
Frag FixBot
-
-
-
-
Stretch the belt and brush roller towards the end of the vacuum.
-
Pop the brush roller back into place.
-
-
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
University of North Texas, Team 1-3, Friess Fall 2024 Mitglied von University of North Texas, Team 1-3, Friess Fall 2024
UNT-FRIESS-F24S1G3
1 Mitglied
6 Anleitungen geschrieben
