Einleitung
Like most canister vacuums, this unit uses wheels to help keep it mobile for a variety of floor types. The Bissell Zing 2156A uses three total wheels: one swivel wheel in front and two side wheels. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.
Hair or other debris can get behind these wheels, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair!
-
-
Remove the dust tank, so the vacuum can lie upside down easily.
-
Press the grey button while pulling up.
-
-
-
-
Place your hand inside between the wheel and vacuum and pry the wheel off.
-
Repeat with the other side.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
University of Memphis, Team 3-4, Sneed Spring 2024 Mitglied von University of Memphis, Team 3-4, Sneed Spring 2024
UM-SNEED-S24S3G4
4 Mitglieder
7 Anleitungen geschrieben
