Zum Hauptinhalt wechseln

Einleitung

In this guide the user will be able to follow a step by step process on how to open the drill and to check on the motor.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Black and Decker LDX 120C Motor  Replacement, Outer Case: Schritt 1, Bild 1 von 1
    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

  2. Black and Decker LDX 120C Motor  Replacement: Schritt 2, Bild 1 von 1
    • Remove the four screws on the back top side of the drill.

  3. Black and Decker LDX 120C Motor  Replacement: Schritt 3, Bild 1 von 1
    • Remove the four screws that connect the chuck to the drill.

  4. Black and Decker LDX 120C Motor  Replacement: Schritt 4, Bild 1 von 1
    • Remove the five screws on the front side of the drill.

  5. Black and Decker LDX 120C Motor  Replacement: Schritt 5, Bild 1 von 1
    • Gently grab both sides of the drill casing, and separate both sides from each other.

  6. Black and Decker LDX 120C Motor  Replacement: Schritt 6, Bild 1 von 1
    • At this point you should be able to separate both as illustrated.

  7. Black and Decker LDX 120C Motor  Replacement: Schritt 7, Bild 1 von 1
    • Now all the components of the drill are visible and can be accessed.

  8. Black and Decker LDX 120C Motor  Replacement, Motor: Schritt 8, Bild 1 von 1
    • After following the prerequisite guide the interior components can now be accessed.

    • The motor is the silver cylinder in the top part of the drill.

    I have an ldx120. There is no “c”, will this motor work with mine?

    Mitch Ward - Antwort

  9. Black and Decker LDX 120C Motor  Replacement: Schritt 9, Bild 1 von 1
    • Separate the top from the rest of the components.

  10. Black and Decker LDX 120C Motor  Replacement: Schritt 10, Bild 1 von 1
    • Do this carefully so that no damage is done to the connection.

  11. Black and Decker LDX 120C Motor  Replacement: Schritt 11, Bild 1 von 1
    • Check if the connection from the motor to the trigger is connected.

    • Then check if the connection to the chip is not intact.

    • If the connection is okay then the motor is probably weak and needs to be replaced.

  12. Black and Decker LDX 120C Motor  Replacement: Schritt 12, Bild 1 von 1
    • To remove the motor simply twist as illustrated in the picture.

    • The way the motor is designed for the LDX 120C is that it is protected inside the aluminum cylinder which works as a magnet.

    • The inside part of the motor can not be accessed, so you will have to replace the entire motor.

  13. Black and Decker LDX 120C Motor  Replacement: Schritt 13, Bild 1 von 1
    • Unscrew the black plastic support from the motor.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

jeffrey zakka

Mitglied seit: 09.02.2016

735 Reputation

6 Anleitungen geschrieben

Team

USF Tampa, Team 11-5, Cheng Spring 2016 Mitglied von USF Tampa, Team 11-5, Cheng Spring 2016

USFT-CHENG-S16S11G5

5 Mitglieder

6 Anleitungen geschrieben

3 Kommentare

Now What?? I have it apart

Jim - Antwort

I own one of these drills while trying to replace the keyless chuck I ruined the shaft it goes on can you tell me How to replace the threaded shaft and where to get replacement parts

irgspllc - Antwort

I own one of these drills I need to replace the keyless chuck and the threaded shaft it goes on. Please tell me how and where to find replacement parts

irgspllc - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 9

Letzten 30 Tage: 41

Insgesamt: 1,987