Zum Hauptinhalt wechseln

Einleitung

To work on the inside of the toaster, the top cover must first be removed. This guide provides instructions on how to remove the top cover.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Unplug the toaster before disassembly.
    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

  2. Toaster will be turned upside down. Clear crumb tray or work over a paper towel.
    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

  3. Detach the bottom from the front cover using the plastic opening tool.
    • Detach the bottom from the front cover using the plastic opening tool.

  4. Turn the toaster right side up.
    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

  5. Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.
    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Dominic Gamonez

Mitglied seit: 15.02.2017

224 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team 8-1, Eyestone Spring 2017 Mitglied von USF Tampa, Team 8-1, Eyestone Spring 2017

USFT-EYESTONE-S17S8G1

3 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 3

Letzten 7 Tage: 15

Letzten 30 Tage: 85

Insgesamt: 3,654