Einleitung

This guide shows you how to remove both the battery housing and the speaker.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn over your BalckBerry 7100g so that the back cover is facing up.
    • Turn over your BalckBerry 7100g so that the back cover is facing up.

    • Locate the battery cover release button near the bottom of the back panel.

    Kommentar hinzufügen

  2. Push down on the release button with one thumb.
    • Push down on the release button with one thumb.

    • Slide the battery cover off with the other thumb.

    Kommentar hinzufügen

    • Remove the battery from the battery housing by flipping up the top of the battery.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    Frohes Fest, frohes Tüfteln!
    Satte 12 € Rabatt auf jeden Einkauf ab 50 €. Einfach den Code FIXMAS12 am Ende deines Bestellvorgangs eingeben
    • Locate the silver strip near the top of your BlackBerry.

    • Use a plastic opening tool to pry off the edge of the silver lining.

    • Slide the tool along the length of the silver strip to completely remove it.

    Kommentar hinzufügen

    • Do not lose the screws. They are quite small and can easily be misplaced.

    • Locate and unscrew the four (4) screws using a T6 screwdriver.

    Kommentar hinzufügen

    • The keypad cover may fall out of the housing when prying the housing apart.

    • Tightly pinch the top of the front and back halves of the housing.

    • Carefully pry the two halves of the housing apart.

    Kommentar hinzufügen

    • You can now easily remove the "guts" of the phone from the housing.

    Kommentar hinzufügen

    • Turn over the motherboard so that the speaker is facing up.

    • Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.

    Kommentar hinzufügen

    • The battery terminal is separate from the battery housing.

      • Do NOT get rid of the terminal if replacing the battery housing and/or the speaker.

      • The terminal will slide out of the housing.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Kellen

Mitglied seit 30.03.2010

262 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 25-87, Amido Spring 2010 Mitglied von Cal Poly, Team 25-87, Amido Spring 2010

CPSU-AMIDO-S10S25G87

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 4,322