Einleitung

This guide explains how to replace the motherboard for your BlackBerry 7100g.

Ersatzteile

Kein Ersatzteil erforderlich.

Turn over your BalckBerry 7100g so that the back cover is facing up.
  • Turn over your BalckBerry 7100g so that the back cover is facing up.

  • Locate the battery cover release button near the bottom of the back panel.

Kommentar hinzufügen

Push down on the release button with one thumb.
  • Push down on the release button with one thumb.

  • Slide the battery cover off with the other thumb.

Kommentar hinzufügen

  • Remove the battery from the battery housing by flipping up the top of the battery.

Kommentar hinzufügen

  • Locate the silver strip near the top of your BlackBerry.

  • Use a plastic opening tool to pry off the edge of the silver lining.

  • Slide the tool along the length of the silver strip to completely remove it.

Kommentar hinzufügen

  • Do not lose the screws. They are quite small and can easily be misplaced.

  • Locate and unscrew the four (4) screws using a T6 screwdriver.

Kommentar hinzufügen

  • The keypad cover may fall out of the housing when prying the housing apart.

  • Tightly pinch the top of the front and back halves of the housing.

  • Carefully pry the two halves of the housing apart.

Kommentar hinzufügen

  • You can now easily remove the "guts" of the phone from the housing.

Kommentar hinzufügen

  • Turn over the motherboard so that the speaker is facing up.

  • Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.

Kommentar hinzufügen

  • The battery terminal is separate from the battery housing.

    • Do NOT get rid of the terminal if replacing the battery housing and/or the speaker.

    • The terminal will slide out of the housing.

Kommentar hinzufügen

  • Turn the "guts" over so the speaker is facing up.

  • Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.

  • Separate the battery housing from the motherboard.

Kommentar hinzufügen

  • Pull the keypad off of the motherboard.

    • It should come off with little effort. If not, there are several tabs that can be released on either side of the keypad.

Kommentar hinzufügen

  • Locate the ribbon connector below the bottom of the screen.

  • Use a spudger to flip up the connector.

Kommentar hinzufügen

  • Locate the four (4) white tabs that attach the screen to the motherboard.

  • Carefully detach the tabs from the motherboard.

  • The screen can now be removed from the motherboard.

Kommentar hinzufügen

  • You have successfully removed the motherboard.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tristan French

Mitglied seit 04.04.2010

16 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 25-87, Amido Spring 2010 Mitglied von Cal Poly, Team 25-87, Amido Spring 2010

CPSU-AMIDO-S10S25G87

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,902