Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Turn over your BalckBerry 7100g so that the back cover is facing up.
-
Locate the battery cover release button near the bottom of the back panel.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Push down on the release button with one thumb.
-
Slide the battery cover off with the other thumb.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Remove the battery from the battery housing by flipping up the top of the battery.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Locate the silver strip near the top of your BlackBerry.
-
Use a plastic opening tool to pry off the edge of the silver lining.
-
Slide the tool along the length of the silver strip to completely remove it.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Locate and unscrew the four (4) screws using a T6 screwdriver.
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Tightly pinch the top of the front and back halves of the housing.
-
Carefully pry the two halves of the housing apart.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
You can now easily remove the "guts" of the phone from the housing.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Turn over the motherboard so that the speaker is facing up.
-
Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Do NOT get rid of the terminal if replacing the battery housing and/or the speaker.
-
The terminal will slide out of the housing.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Turn the "guts" over so the speaker is facing up.
-
Locate and unscrew the four (4) screws near the bottom of the motherboard, using a T6 screwdriver.
-
Separate the battery housing from the motherboard.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Pull the keypad off of the motherboard.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Locate the ribbon connector below the bottom of the screen.
-
Use a spudger to flip up the connector.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Locate the four (4) white tabs that attach the screen to the motherboard.
-
Carefully detach the tabs from the motherboard.
-
The screen can now be removed from the motherboard.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
You have successfully removed the motherboard.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.