Was du brauchst
-
-
Using the T6 Torx screwdriver, remove the bottom two screws on the back of the phone.
-
-
-
Remove speaker phone cover by unsecuring the two latches on the edge close to top of the phone with the plastic opening tool.
-
-
-
-
Detach the speaker phone cover by pulling up on the bottom of the speaker phone cover.
-
-
-
Turn the phone sideways and unlatch the hinge on one side of the phone by pushing inwards and twisting to the side with the plastic opening tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 3-16, Maness Winter 2010 Mitglied von Cal Poly, Team 3-16, Maness Winter 2010
CPSU-MANESS-W10S3G16
4 Mitglieder
10 Anleitungen geschrieben
