Ersatzteile

Kein Ersatzteil erforderlich.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Kommentar hinzufügen

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Kommentar hinzufügen

Lift off the back cover.
  • Lift off the back cover.

Kommentar hinzufügen

Remove the two T6 screws.
  • Remove the two T6 screws.

Kommentar hinzufügen

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Nick Alejandro

Mitglied seit 24.01.2010

3 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 14-44, Regan Winter 2010 Mitglied von Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,448