Einleitung

This guide demonstrates how to remove and replace the LCD screen.

Ersatzteile

Kein Ersatzteil erforderlich.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Kommentar hinzufügen

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Kommentar hinzufügen

  • Lift off the back cover.

Kommentar hinzufügen

  • Remove the two T6 screws.

Kommentar hinzufügen

  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Kommentar hinzufügen

  • Unscrew the screw holding the back plate.

Kommentar hinzufügen

  • Carefully pry off front cover. Make sure the plastic clips are unlatched before applying force.

  • Lift off front cover from metal plate.

Kommentar hinzufügen

  • Pry off the LCD screen with spudger at the two clips.

Kommentar hinzufügen

  • Remove the LCD screen and replace it with a new one.

  • Careful not to rip the LCD ribbon.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Mitglied seit 24.01.2010

12 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 14-44, Regan Winter 2010 Mitglied von Cal Poly, Team 14-44, Regan Winter 2010

CPSU-REGAN-W10S14G44

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 2

Insgesamt: 2,501