Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 2 : Schritt 1, Bild 2 von 2
    • Remove the rear cover from the phone.

    • Remove the battery.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Using a small plastic opening tool, remove the lower rear cover.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Remove the six screws from the midframe of the device.

    • Be careful not to damage the screws while removing them.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 1
    • Remove the midframe from the phone.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 2 : Schritt 5, Bild 2 von 2
    • Gently pry the back the plastic tabs that secure the motherboard to the case.

    • Slowly work your way around the case with the tabs until the motherboard comes free.

    • Remove the motherboard.

    • The keypad and navigation ball may become loose and fall away from the motherboard.

Ziellinie

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Renae Bishop

Mitglied seit: 09/07/11

68 Reputation

4 Anleitungen geschrieben

Team

Cuesta, Team 1-3, Zipperian Fall 2011 Mitglied von Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 Mitglieder

8 Anleitungen geschrieben

Ein Kommentar

Excellent, please suggest me how can I get the replacement original case shipped to Gaborone, Botswana. I also need two screws shown at the top of the cell at step 3

d.arm1965 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 3,313