Zum Hauptinhalt wechseln

Einleitung

Replace the internal Battery of this device

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the battery cover by grabbing the notch under the bottom speakers and lifting.
    • Remove the battery cover by grabbing the notch under the bottom speakers and lifting.

  2. Remove the SIM card and the Media SD card by pushing on them.
    • Remove the SIM card and the Media SD card by pushing on them.

  3. Locate and unscrew all 10 T5 screws around the back cover Locate and unscrew all 10 T5 screws around the back cover Locate and unscrew all 10 T5 screws around the back cover
    • Locate and unscrew all 10 T5 screws around the back cover

  4. Use Plastic opening tools to separate the LCD from the Main body Do NOT remove the screen yet, it is attached with a very fragile ribbon to the main board.
    • Use Plastic opening tools to separate the LCD from the Main body

    • Do NOT remove the screen yet, it is attached with a very fragile ribbon to the main board.

    • Start on the same side of the Audio Jack

  5. Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen

    Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen
  6. Use a plastic tool to carefully switch up the LCD ribbon holder Detach the LCD from the main board
    • Use a plastic tool to carefully switch up the LCD ribbon holder

    • Detach the LCD from the main board

    • When installing the new LCD, make sure the ribbon is inserted to the white line.

  7. You can now detach the LCD Panel from the main frame.
    • You can now detach the LCD Panel from the main frame.

  8. With a plastic tool, untie the system board by detaching the ribbons attached to it
    • With a plastic tool, untie the system board by detaching the ribbons attached to it

    • The battery ribbon is on the bottom right

    • Be gentle when detaching these Ribbons as they are very easy to tear and damage.

  9. Be gentle as any other system board ribbons, they are very easy to damage
    • Be gentle as any other system board ribbons, they are very easy to damage

  10. Power Button /Audio Jack
    • Power Button /Audio Jack

    • Flash

    • Rear Facing Camera

  11. Once all Ribbons untied, gently wiggle the system board out of the frame
    • Once all Ribbons untied, gently wiggle the system board out of the frame

    • Do not pull hard as there might be a ribbon on the way

  12. Use a pair of pliers to remove the rear facing camera Use a pair of pliers to remove the rear facing camera
    • Use a pair of pliers to remove the rear facing camera

  13. If this is the original battery, it might be hold down by VERY strong adhesive on the top, middle and bottom part. Be careful not to damage the battery As pointed in the comments, be careful about the NFC membrane when removing the battery. Use heat to loosen the glue. As pointed in the comments, be careful about the NFC membrane when removing the battery. Use heat to loosen the glue.
    • If this is the original battery, it might be hold down by VERY strong adhesive on the top, middle and bottom part. Be careful not to damage the battery

    • As pointed in the comments, be careful about the NFC membrane when removing the battery. Use heat to loosen the glue.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer haben diese Anleitung absolviert.

Hans

Mitglied seit: 20.10.2014

1.575 Reputation

6 Anleitungen geschrieben

Team

Mero IT Services Mitglied von Mero IT Services

Business

1 Mitglied

6 Anleitungen geschrieben

Good guide, but one caveat - when removing the battery, the adhesive is pretty much directly attached to the NFC "plate" (a flexible square membrane with a pair of contacts on the bottom left side of the battery). If you try to extract the battery, you will have difficulty not destroying this membrane. Do not use a wedge - you must slowly remove the battery, preferably using a heat gun to loosen the glue.

Or get a battery already glued into a back plate.

wfines - Antwort

Thank you for the detail. I will add a notice about that on the last step.

Hans -

How to change the USB port

Yass Tra - Antwort

Thank you !!!

Yass Tra - Antwort

OMG! The procedure looks horrible !!

mwlacey - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Past 24 Hours: 2

Past 7 Days: 21

Past 30 Days: 104

Insgesamt: 20,907