Zum Hauptinhalt wechseln

Einleitung

This guide outlines how to remove the battery connector from the device.

Ersatzteile

Keine Ersatzteile angegeben.

  1. With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
    • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

  2. Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
    • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

  3. Remove the battery by pushing against it from the right and then pulling towards you.
    • Remove the battery by pushing against it from the right and then pulling towards you.

  4. Android Fix Kits

    A new screen or battery is one kit away.

    Jetzt kaufen

    Android Fix Kits

    A new screen or battery is one kit away.

    Jetzt kaufen
  5. Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.
    • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

  6. Use a plastic opening tool or your fingernails to remove the plastic backing. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated. Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.
    • Use a plastic opening tool or your fingernails to remove the plastic backing.

    • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

  7. Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.
    • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

    • Place the four screws released from the phone in a plastic bag.

  8. The black battery casing and logic board can now be separated for the following steps.
    • The black battery casing and logic board can now be separated for the following steps.

  9. With the speaker facing you, place your fingers on the gold battery connector.
    • With the speaker facing you, place your fingers on the gold battery connector.

    • Pull upwards and release the battery connector from the black body piece.

Abschluss

To reassemble your device, follow these instructions in reverse order.

kelogan

Mitglied seit: 04.11.2009

1 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 9-17, Regan Fall 2009 Mitglied von Cal Poly, Team 9-17, Regan Fall 2009

CPSU-REGAN-F09S9G17

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,175