Einleitung
Disassembling the motherboard in the rear of the Blackberry allows you to get to the LCD screen and keypad.
Was du brauchst
-
-
Turn the phone upside down.
-
Push down on the black button on the back of the phone to slide the rear panel off.
-
The battery should be visible now.
-
-
-
Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.
-
-
-
Use a pick or plastic opening tool to push the clips holding the rear away from you.
-
-
-
-
Repeat the process of unlatching the clips for the top section of the Blackberry.
-
-
-
Remove the motherboard.
-
Remove the indicated screw using the T6 Torx screwdriver.
-
-
-
Place the faceplate face-down and the interior of the phone face-up, as shown.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 5-7, Forte Winter 2010 Mitglied von Cal Poly, Team 5-7, Forte Winter 2010
CPSU-FORTE-W10S5G7
5 Mitglieder
9 Anleitungen geschrieben
