Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Ersatzteile

Keine Ersatzteile angegeben.

  1. Gently pry the front mesh cover off of the SoundDock using a metal spudger. The mesh is held on by small velcro  strips so if you hear a tearing sound it is just the velcro coming apart The mesh is held on by small velcro  strips so if you hear a tearing sound it is just the velcro coming apart
    • Gently pry the front mesh cover off of the SoundDock using a metal spudger.

    • The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart

  2. Remove the four 16mm #2 screws holding the speaker to the base using a #2 screwdriver Gently lift the speaker from the base.
    • Remove the four 16mm #2 screws holding the speaker to the base using a #2 screwdriver

    • Gently lift the speaker from the base.

    • Do not lift the speaker to far out of the base, you may damage the wires.

  3. You will notice 2 coils of wire around the speaker's input tabs. Slide these coils off as un-winding the wires may break the wires. Slide the coils around your new driver.
    • You will notice 2 coils of wire around the speaker's input tabs. Slide these coils off as un-winding the wires may break the wires. Slide the coils around your new driver.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Evan Low

Mitglied seit: 14.04.2015

497 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 4-1, Maness Spring 2015 Mitglied von Cal Poly, Team 4-1, Maness Spring 2015

CPSU-MANESS-S15S4G1

4 Mitglieder

5 Anleitungen geschrieben

I am unsure of what to do in step #3…

Is the purpose to remove the speaker completely and place a brand new one? (Making sure not to pull the old speaker too far out as to not break any wire… ) ???

Edited comment:

I am not sure what they mean by "pins".

vero198099 - Antwort

Hi I just accidently pushed in that dome part in the middle a little and now it distorts. I tried using a vacuum but it didnt work. Please help!!!!!!!!

AJ Grape - Antwort

Try to see if there’s any way you can reduce the nozzle size of the vacuum cleaner you’re using - this should increase the flow rate, and possibly the amount of force applied over such a small area.

Alternatively, you can use a very very fine needle, bend the end of it, and use it to “hook” the cone. This method is really a last resort, as you want to avoid making even the smallest of holes.

Absolute last resort is replacing the speaker, which if you can find a replacement, should be pretty easy.

Colm Donnelly -

Need help love this speaker when it’s played loud it makes a load noise when the base is on changed aux lead think it’s the speaker what do I do

Chantelle Webb - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 5

Letzten 7 Tage: 20

Letzten 30 Tage: 72

Insgesamt: 9,525