Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

Diese Anleitung zeigt dir, wie du die vier Schrauben, welche die beiden Gehäusehälften zusammenhalten, entfernen und die beiden Gehäuseteile trennen kannst.

  1. Auf der Rückseite des Geräts findest du vier runde Kunststoffstopfen. Heble  mit einem Metallspatel vorsichtig die vier Stopfen heraus.
    • Auf der Rückseite des Geräts findest du vier runde Kunststoffstopfen.

    • Heble mit einem Metallspatel vorsichtig die vier Stopfen heraus.

    • Die Stopfen sind verklebt. Sei vorsichtig und zerkratze nicht das Gehäuse beim Entfernen. Benutze, wenn möglich, ein Werkzeug aus Plastik.

    hi i just finished prying apart those round buttons. it is very important to know if you dont want to mangle the button trying to pry it loose. if your looking down at the four buttons the inside part of all the four round circles is where you put a thin small tool, that is where the opening is to eventually pull up the whole thing without having to mangle the circle. so if your looking at the four circles the opening will be in the part of circle where all rounds face each other inward i hope this helps

    art - Antwort

    Note that the torx plus is a 5 star tool, and was the size 15 for me. Make sure you don't purchase the common 6 sided star tool.

    Mark - Antwort

    Knowing you have to replace battery, why are the %#*@ things glued on? Just sayin’

    Toni - Antwort

    Knowing battery needs to be replaced, why are these things glued??

    Toni - Antwort

    Not a tool to remove! Why’re they glued in the first place?

    Toni - Antwort

    I’ve ruined perfectly good tools!

    Toni - Antwort

    This has become stupid! Posting comments that never appear!

    Toni - Antwort

    Should be effing impossible!

    Toni - Antwort

    Sorry, just now found them! Honestly, this can become impossible!

    Toni - Antwort

    I found it not possible to remove the screw caps cleanly, without messing up the case around the caps. Here’s a new method. This method damages the screw caps, but it keeps the case from getting mangled.

    1. Use a spring-loaded center punch to emboss a small dimple in the center of each screw cap.

    2. Drill a hole (using a 1/8th-inch bit) in each cap, using the aforementioned dimple to center the bit.

    3. Use a small screwdriver shaft to pry out each screw cap, working each cap gently up and out, in a circular motion.

    NOTE: The prying action (not to mention the hole you just drilled) will damage the screw caps enough that you probably will end up just tossing them. They serve no functional purpose other than to make replacing the battery more challenging. (Thanks Bose!)

    If you do elect to re-install the screw caps, note that they’re keyed uniquely (in pairs). They are not interchangeable.

    I tossed mine.

    Riccardo - Antwort

    I used a similar method, however, I found a small screw to fit the hole, screwed it in place, I could then grab the upper part of the screw around the head area with a pair of pliers and pull the plugs out with no problem. Take note of the 5 sided torx bit. Not the standard 6 sided ones.

    timjamie -

    There is no such animal as a 1.8 cm Torx plus bit. A great site made poor with misleading information. Boo hoo

    phpeh - Antwort

  2. Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen

    Nintendo Switch Kits

    Eine schnelle Lösung, um wieder ins Spiel zu kommen

    Switch Kits kaufen
  3. Entferne die vier 1,8 cm Torx Plus TR Schrauben vom äußeren Gehäuse. Entferne die vier 1,8 cm Torx Plus TR Schrauben vom äußeren Gehäuse.
    • Entferne die vier 1,8 cm Torx Plus TR Schrauben vom äußeren Gehäuse.

    the torque sizing bit would be the number 5 torque bit which will fit in the screw to unscrew it

    art - Antwort

    My experience required a number 15 torx plus head.

    This was a 5 sided star, not a 6 sided star.

    Mark - Antwort

    It's NOT torx plus. It's torx SECURITY. Torx Plus is designed for high torque situations. The bit with the hole in the middle is Torx Security.

    Dennis Lupatsky - Antwort

    So what size Torx Security bit is needed for this task please and thank you

    Cobb Adams -

    Ok,how much more complicated can this get?

    Toni - Antwort

    Disappointed the Pro Tech Toolkit didn’t include the tip I needed. However I would like to know how to buy a 1.8 tip. The link you give in the list of tools needed takes me to a product on Amazon which includes 10, 15, 20 tips. I’d assume a 1.8 cm would be an 18?

    mark thornburg - Antwort

    1,8 cm is the length of the screw. Security Torx f a center pin, so you need a tip with a corresponding hole. Try 10, 15 or 20.

    VauWeh -

    1,8 cm is the length of the screw. Security Torx feature a center pin, so you need a tip with a corresponding hole. Try 10, 15 or 20.

    VauWeh - Antwort

    Security Torx 15 with 5 sides.

    agentbad - Antwort

    Hard to remove plugs, glue in the screw head, special torx security screws… it’s almost like Bose wants you to have to replace it when the battery dies. I will… but JBL makes one for about the same price. I won’t give Bose the satisfaction of having beaten me.

    cmajerle - Antwort

  4. Öffne vorsichtig das Gehäuse. Das obere Tastenfeld muss beim Zusammenbau wahrscheinlich wieder festgeklebt werden.
    • Öffne vorsichtig das Gehäuse.

    • Das obere Tastenfeld muss beim Zusammenbau wahrscheinlich wieder festgeklebt werden.

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.

12 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:

100%

VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

When I search for a 1.8 cm Torx Plus TR drill bit, I see a whole set from Amazon. Is there a particular number or head size just so I can purchase one drill bit?

jwm82 - Antwort

Hey, did you find out what size screwdriver you need?

kestis155 -

yes its the number 5 torque

art -

dose anyone know where to buy the outer casing for these? i need a mint colored one.

idixon16 - Antwort

I need more information on the Torx Plus bit can you provide the exact size as you used. The 1.8cm is not easy to search for. Brand and exact size number would help.

Joseph - Antwort

yes its the number 5 torque to fit the screw perfectly

art -

Can we get some details on the battery, like dimensions, mAh, voltage? Hopefully it isn't some proprietary thing, I still can't even get my screw covers off, Bose really prefers we all purchase new ones instead of repair it. I have used all of my various spudgers and iSesame's, maybe I have to hot glue a chop stick in the middle of each cover and pull them off like that? Hard to get leverage in those tiny crevices.

Matt - Antwort

did anyone ever figure out where to buy the housing/casing?

Humair Madhani - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 15

Letzten 7 Tage: 71

Letzten 30 Tage: 288

Insgesamt: 20,666