Braven BRV-1s Outer Casing Replacement

Einleitung

A cracked outer case will allow moisture or other unwanted particles to enter the speaker. This will eventually result in complete speaker failure. In this guide, one will learn how to successfully remove and replace the outer rugged shell of the speaker.

Was du brauchst

Schritt 1 Outer Casing

Braven BRV-1s Outer Casing Replacement, Outer Casing: Schritt 1, Bild 1 von 1

To remove the outer case, remove 4 phillips screws (Phillips #00 headtype, 9.3mm long)

Bearbeiten

Schritt 2

Using a metal spudger, gently pry the side of the defective case.

Bearbeiten

Schritt 3

Still using the metal spudger, continue to work your way around the outer case.

Bearbeiten

Schritt 4

Remove the broken outer case. Replace with used/new out case.
Note that unless properly sealed with glue, the speaker will no longer be water resistant.

Bearbeiten