Repariere deine Sachen Community Store

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Brother PT-1290 Tape Cassette Replacement

Einleitung

In this guide, you will see how to replace the tape cassette to your Brother PT-1290.

  1. Brother PT-1290 Tape Cassette Replacement, Removing the back piece of the label maker.: Schritt 1, Bild 1 von 3 Brother PT-1290 Tape Cassette Replacement, Removing the back piece of the label maker.: Schritt 1, Bild 2 von 3 Brother PT-1290 Tape Cassette Replacement, Removing the back piece of the label maker.: Schritt 1, Bild 3 von 3

    • Turn the device off.

    • Turn the brother label maker over and press down on the top part (by the face plate) and push on the circle part with ridges.

    • Gently pull the label maker apart. It will split in half, but be careful with the back piece to prevent any damage.

    Übersetzen

  2. Brother PT-1290 Tape Cassette Replacement, Removing batteries or AC adapter.: Schritt 2, Bild 1 von 3 Brother PT-1290 Tape Cassette Replacement, Removing batteries or AC adapter.: Schritt 2, Bild 2 von 3 Brother PT-1290 Tape Cassette Replacement, Removing batteries or AC adapter.: Schritt 2, Bild 3 von 3

    • For safety precautions, it is advise that you remove the batteries before trying to remove and replace your tape cassette.

    • If you're using an AC adapter remove it from the label maker. If using both, do both steps to turn off your label maker.

    Übersetzen

  4. Brother PT-1290 Tape Cassette Replacement, Replacing tape cassette.: Schritt 3, Bild 1 von 3 Brother PT-1290 Tape Cassette Replacement, Replacing tape cassette.: Schritt 3, Bild 2 von 3 Brother PT-1290 Tape Cassette Replacement, Replacing tape cassette.: Schritt 3, Bild 3 von 3

    • When inserting the tape cassette it should snap into place. Check to see if the tape is feeding under the tape guides.

    • If the ribbon becomes or is loose, use your finger to wind the white wheel in the direction of the arrow of the tape cassette.

    • Only use Brother TZ tapes with this label maker machine.

    Übersetzen

  5. Brother PT-1290 Tape Cassette Replacement, Evaluating: Schritt 4, Bild 1 von 3 Brother PT-1290 Tape Cassette Replacement, Evaluating: Schritt 4, Bild 2 von 3 Brother PT-1290 Tape Cassette Replacement, Evaluating: Schritt 4, Bild 3 von 3

    • Now, that you have inserted the tape, place the batteries back. Make sure they are in the proper direction and place in tightly. Close the label maker, press the power button and is now ready for use.

    • If your using an AC adapter or both batteries/AC adapter, make sure the AC adapter is plugged into the AC outlet. Then place correctly and push in fully to plug-in on top corner on device. Also, check that your batteries are place in correctly, if using both.

    Übersetzen

  6. Brother PT-1290 Tape Cassette Replacement, Feeding Tape.: Schritt 5, Bild 1 von 2 Brother PT-1290 Tape Cassette Replacement, Feeding Tape.: Schritt 5, Bild 2 von 2

    • After installing the tape press the up key to feed the tape then the cutter button to cut the tape off.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 9 anderen Mitwirkenden

Lorraine Canez

Mitglied seit: 10/25/14

318 Reputation

3 Anleitungen geschrieben

Auszeichnungen: 9

+ 6 weitere Auszeichnungen

Team

Gateway, Team 1-4, Johnson Fall 2014 Mitglied von Gateway, Team 1-4, Johnson Fall 2014

GCC-JOHNSON-F14S1G4

3 Mitglieder

6 Anleitungen geschrieben

Ein Kommentar

Wie wird die Kassette eingesetzt

Uwe Seiler - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 15

Letzte 30 Tage: 44

Insgesamt: 19,771