Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Follow this guide to remove the riser main slider in order to repair or replace it.
Was du brauchst
-
-
Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.
-
-
-
-
Remove the head and handle, and place them on a clean surface to prevent contamination.
-
-
-
Lift the slider and riser main pipe.
-
Place a pump rod clamp around the rod, and tighten it securely against the pump rod.
-
Carefully lower the riser main and slider to allow it to rest on the rod clamp.
-
-
-
Loosen and remove both the pump rod jam nut and pump rod nut on the top of the slider.
-
-
-
Remove the riser main slider, and inspect it for wear and tear.
-
Set the slider in a sanitary place to prevent contamination.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
