Einleitung
This guide will teach a user how to replace a broken film rewind crank on the Canon AE-1 SLR. The film rewind crank allows the photographer to reel film back into its container once all exposures have been shot so that the film can be developed.
Was du brauchst
-
-
Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.
-
-
-
-
Remove two phillips screws
-
With the screws removed, the silver plate can now be removed as well.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
UW Stout, Team 5-1, Zhou Fall 2011 Mitglied von UW Stout, Team 5-1, Zhou Fall 2011
UWSTOUT-ZHOU-F11S5G1
3 Mitglieder
12 Anleitungen geschrieben
