Canon AE-1 SLR Lens Mount Replacement

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Einleitung

This guide will teach the user how to remove a damaged SLR lens mount on the Cannon AE-1. The SLR lens mount allows the user to connect different lens to the Canon AE-1.

Was du brauchst

Schritt 1 SLR Lens Mount

Canon AE-1 SLR Lens Mount Replacement, SLR Lens Mount: Schritt 1, Bild 1 von 2

Canon AE-1 SLR Lens Mount Replacement, SLR Lens Mount: Schritt 1, Bild 2 von 2

Remove the first set of two #00 phillips screws from the lens outer casing
The first set of screws are located on the front and bottom of the lens casing
Pull the screws out and set them aside so as not to lose them

Übersetzen

Schritt 2

Remove the remaining two #00 phillip screws from the lens outer casing
The second set is located left and right side of the lens casing
Pull the screws out and set them aside so as not to lose them

Übersetzen

Schritt 3

Once the screws have been taken out, you may simply remove the lens casing by pulling it away from the body of the camera.

Übersetzen

Schritt 4

Remove the four #00 phillips screws from the SLR Lens Mount

Übersetzen

Schritt 5

Canon AE-1 SLR Lens Mount Replacement: Schritt 5, Bild 3 von 3

After the screws have been removed, pull the SLR Lens Mount away from the body of the camera
Be aware that a pin will fall out when the SLR Lens Mount is removed.