Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The Remote Control Socket is not difficult to access. However, it's connections are soldered, so it will be difficult to remove.
Was du brauchst
-
-
Remove the two 4.8 mm black screws above the lens on the front of the camera.
-
-
-
Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
-
-
-
-
Remove two 6.5 mm black screws from the panel.
-
-
-
Remove one 4.8 mm silver screw securing Remote Control Socket to camera.
-
-
-
Remote Control Socket is now secured by 3 wires.
-
Desolder connections to replace Remote Control Socket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.