Einleitung

This is fairly straight forward, and something you may do in the normal use of your camera. It is even in the manual.

  1. Removing the eyepiece is easy.  There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off. Grip the eyepiece by the sides firmly (index finger and thumb).  Wiggle it upwards until it is off.
    • Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.

    • Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.

  2. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  3. Open the battery door Rotate the door so the one side of the hinge pops out (see photo #2)
    • Open the battery door

    • Rotate the door so the one side of the hinge pops out (see photo #2)

    • Slide other pin out (it pops out the same, but this is easier)

Abschluss

To reassemble your device, follow these instructions in reverse order.

Rubber grips will require adhesive. (I havent gotten this far, I assume rubber cement / double stick tape may work)

4 weitere Nutzer haben diese Anleitung absolviert.

Eric D

Mitglied seit: 13.11.2012

1.080 Reputation

5 Anleitungen geschrieben

But how do you REPLACE the rubber eye piece? Mine seems to be NOT glued, but in a tract of sorts.

Wendell C Durnil - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 11

Letzte 30 Tage: 32

Insgesamt: 4,900