Einleitung
If the rubber grip on the camera is dirty or has fallen off, follow these instructions to remove the grip.
Was du brauchst
-
-
Use a plastic prying tool to slowly pry the rubber grip from the top right corner, and slowly work the tool down the rubber grip.
-
Gently remove the rubber grip by pulling the adhesive side up and away from the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.